DSC LE4010-RG Cellular Universal Wireless Alarm Communicator

CAD $253.15
Part Number:
Stock Number:
2.11 LBS
Calculated at Checkout



DSC LE4010-RG cellular universal wireless alarm communicator for Rogers network for use in Canada. Includes SIM card.

The LE4010 connects the alarm control panel to the Cellular network and reports alarm signals directly to a monitoring station receiver (Sur-Gard System I-IP/II/III/IV/5). The LE4010 uses the Cellular network to ensure low-cost, high-speed and reliable alarm communications and is compatible with control panels that communicate using the Contact ID or SIA (300 baud) formats.

The LE4010 is installed between the telephone connection of a control panel and telephone line. When used in a backup role, the communicator assesses the connection to the PSTN phone line, and if that has failed, it then connects to the Cellular network to send an alarm signal to the monitoring station. In a primary role, the communicator simply sends the alarm transmission over the Cellular network immediately.


  • Uses LTE network for high-speed, reliable and low-cost communications to an IP receiver
  • Automatically switches to 3G (HSPA/HSPA+) if LTE service is not available
  • Compatible with control panels that communicate using the Contact ID  or SIA (300 baud) formats
  • Full event reporting
  • 4 on-board inputs with NC, NO or SEOL supervision
  • 4 on-board outputs (open collector)
  • Activation and initialization via web-user or mobile interface provided by C24 Communications
  • PTM (Panel Transmission Monitor) switches from PSTN to cellular on unsuccessful communication attempts
  • Compatible with Sur-Gard System  I-IP/II/III/IV/5 monitoring station receivers


LE4010-RG Installation Manual

LE4010-RG Installation Guide

LE4010-RG Spec Sheet