TRENDNet TPE-LG50 5-Port Gigabit Long Range PoE+ Switch

CAD $89.99
Part Number:
TPE-LG50
UPC / EAN:
710931161304
Stock Number:
11742
Weight:
2.16 LBS
Shipping:
Calculated at Checkout

Description

Description

The 5-Port Gigabit Long Range PoE+ Switch, model TPE-LG50, delivers data and power over existing Ethernet cables to Power over Ethernet (PoE)devices such as access points, VoIP phones, and IP Cameras. It supports both PoE (802.3af) and PoE+ (802.3at) devices with a 32W PoE budget. Enable the DIP switch to extend the PoE+ signal up to 200m (656 ft.) at 10Mbps for long distance PoE installations. Plug and play this sturdy metal switch for reliable high speed PoE networking. Its fanless design is perfect for quiet environments that require silent operation.

PoE+ Power

A 32W PoE power budget supports up to four Power over Ethernet devices.

Gigabit

Five Gigabit ports provide a 10Gbps switching capacity to support edge network installations.

Long Range PoE+ Switch

Enable the DIP switch to extend PoE+ signal up to 200m (656 ft.) at 10Mbps.

Features

  • Easy installation
  • 4 x Gigabit PoE+ ports and 1 x Gigabit port
  • Enable the DIP switch to extend PoE+ signal up to 200m (656 ft.) at 10Mbps
  • DIP switch supports VLAN port isolation and QoS
  • 10Gbps switching capacity
  • 32W PoE budget
  • Wall mountable design
  • Use with TRENDnet's PoE splitter to network and power non-PoE devices

Specifications

Standards IEEE 802.3
IEEE 802.3u
IEEE 802.3ab
IEEE 802.3x
IEEE 802.3p
IEEE 802.3af
IEEE 802.3at
Device Interface 4 x Gigabit PoE+ ports
1 x Gigabit port
DIP switch
LED indicators
Data Transfer Rate Ethernet: 10Mbps (half duplex), 20Mbps (full duplex)
Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex)
Gigabit Ethernet: 2000Mbps (full duplex)
Performance Switch Fabric: 10Gbps
RAM Buffer: 128KB
MAC Address Table: 2K entries
Jumbo Frames: 9KB
Forwarding rate: 7.44Mpps (64-byte packet size)
Special Features Long range PoE+ up to 200m at 10Mbps
VLAN port isolation
802.1p Class of Service (CoS)
Wall mountable
DIP Switch
Switch Status Function
1 OFF Ports 1 & 2: Default gigabit PoE+
ON Ports 1 & 2: Long range PoE+ up to 200m at 10Mbps
2 OFF Ports 3 & 4: Default gigabit PoE+
ON Ports 3 & 4: Long range PoE+ up to 200m at 10Mbps
3 OFF VLAN port isolation disabled
ON VLAN port isolation on ports 1-4
4 OFF QoS disabled
ON QoS Enabled: Video & Voice – High Priority
Power Input: 100 – 240 V AC, 50/60Hz, 1.2A
Output: 54V DC, 0.7A external power adapter
Max. consumption: 36.3W
PoE PoE budget: 32W
PoE Mode A: Pins 1,2 for power and pins 3,6 for power
Operating Temperature 0° – 40 °C (32° – 104 °F)
Operating Humidity Max. 90% non-condensing
Dimensions 121 x 75 x 26mm (4.76 x 2.95 x 1 in.)
Weight 246g (8.68 oz.)
Certifications CE
FCC

Resources

Datasheet

Quick Installation Guide