Description
Description
The N300 Wireless 12dBi Outdoor 5GHz PoE Access Point, model TEW-676APBO, provides high speed point-to-point building connectivity. It supports a variety of installation scenarios with Access Point, Router Access Point, Wireless Distribution System (WDS), Customer Premises Equipment (CPE), and Repeater modes. An IP-66/67 weather rating and rugged aluminum housing ensures the highest level of protection against extreme weather. An outdoor mounting kit is included and weatherproof LED indicators expedite product installation and troubleshooting.
No need to install this access point near a power source—PoE technology transmits both power and data over an Ethernet cable. Support for the latest wireless security protocols ensures the highest level of network protection. Install this access point with TRENDnet’s Outdoor Lightning Arrestor Kit, model TEW-ASAL1, to protect your entire network from catastrophic lightning strikes.
Features
- PoE compliant device
- 1 x 10/100Mbps PoE Auto-MDIX LAN port
- 1 x reset button
- LED indicators: Power, WLAN, LAN
- Internal high powered 12dBi patch antenna (polarization: V30°, H30°)
- Compliant with 802.11n/a technology (5 GHz spectrum) with data rates up to 300Mbps
- Rugged IP66/67 rated weather proof aluminum housing
- Supports Router Access Point (AP), Access Point (AP), Wireless Distribution System (WDS), Customer Premises Equipment (CPE), Client Bridge + Repeater, and CPE + AP modes
- Multiple SSID or Virtual Access Points with Layer 2 VLAN client isolation
- Access restriction with Internet Access Control, MAC, and IP filtering
- Universal Plug and Play (UPnP) for auto discovery and support for device configuration of Internet applications
- Complete wireless security with WPA/WPA2-RADIUS, WPA /WPA2-PSK, and WEP
- Multiple pass-through sessions for popular VPN applications (IPSec, L2TP, and PPTP)
- Quality of Service technology: IEEE 802.11p COS, IEEE 802.11q Tag VLAN priority control and Wi-Fi Multimedia (WMM)
- Supports IEEE 802.11f IAPP (Inter Access Point Protocol), IEEE 802.11h (Transmission Power Control) and IEEE 802.11d (Multi-country roaming)
- Easy setup via Web browser using the latest versions of Internet Explorer, FireFox, and Safari
- Supports SNMP (v2c and v3), Telnet, SSH, and HTTP/HTTPS management
- Surface mounting hardware
- Electrical ground cable
Specifications
Hardware | |
Standards | Wired: IEEE 802.3u (100Base-TX) Wireless: IEEE 802.11a/n (5 GHz) |
LED Indicator | Power, LAN, WLAN (wireless activity) |
Antenna | 12dBi patch antenna (polarization: V30°, H30°) |
PoE | 1 x 10/100Mbps RJ-45 PoE port, Passive only (non-802.3af compliant) |
Dimension (L x W x H) | 215 x 122 x 66 mm ( 8.5 x 4.8 x 2.6 in) |
Weight | 1kg (2.2lbs) |
Power Consumption | 15 Watts (max.) |
Management | Web browser (HTTP/HTTPS), SNMP (v2c and 3), Telnet, SSH |
Wind Speed Support | 210 km/hr |
Waterproof | IP66/67 compliant |
Temperature | Operating: -20° ~ 60°C (-4°F ~ 140°F) Storage: 0° ~ 60°C (32°F ~ 140°F) |
Humidity | Max. 95% (non-condensing) |
Power | PoE power injector DC output: 48VDC, 0.4A |
Certifications | FCC |
Wireless | |
Frequency | 5.725 ~ 5.845 GHz |
Modes | Router, Access Point + WDS, WDS, CPE, Client Bridge + Repeater, CPE + Access Point |
Virtual Access Points | 7 |
Associated Clients (max) | 224 (AP Mode), 32 (Repeater Mode) |
Coverage* | 7km line-of-sight |
Modulation Technique | 802.11a: OFDM with BPSK, QPSK, QAM and 64QAM 802.11n: BPSK, QPSK, 16-QAM, 64-QAM |
Data Rate (auto-fallback) | 802.11a: up to 54Mbps 802.11a/n: up to 300Mbps |
Security | 64/128/152-bit WEP, WPA /WPA2-PSK, WPA/WPA2-RADIUS for AP/CPE mode, WEP/WPA2-PSK for WDS mode MAC filter (20 entries) and IP filter (20 entries) |
Output Power | Up to 27dBm (FCC) |
Receiving Sensitivity | 802.11a: -91dBm (typical) @ 6Mpbs 802.11a/n: -68dBm (typical) @ 300Mbps |
Channels | FCC: 149,153,157,161,165 |