Description
Description
Mircom's DTC-300AR is a stand-alone 6-zone, dual-line Digital Alarm Communicator Transmitter (DACT / Dialer) that can be connected to any fire alarm control panel to allow reporting to a central monitoring station.
The DTC-300AR is a dual-line dialer, meaning it can be connected to two telephone lines, and will automatically transmit a trouble signal if it detects a failure of either telephone line. This ensures critical alarm signals are transmitted, even in the event of a single-line failure. The DACT uses the Security Industry Association (SIA) and Ademco Contact ID reporting protocols.
The DTC-300AR contains 6 input zones which can be configured for Common Alarm, Common Trouble, Common Supervisory, Common Waterflow Alarm, AC Power Fail Trouble and Battery Trouble.
The DTC-300AR requires a 24VDC filtered or 24VDC Full Wave Rectified (FWR) power source, which is typically supplied by the fire alarm panel's 24VDC auxiliary power output. It can be configured locally via the on-board keypad using the CFG-300 Configuration Tool or with a UIMA programming tool and a computer with an available serial or USB port. In addition, the DTC-300A can be remotely configured using a PC with a modem.
Features
- Reports using standard SIA or Contact ID protocols
- Stand-alone design means it is compatible with many types of fire alarm control panels
- 6 Configurable input zones
- Dual-line communicator
- Provides event logs of 500 entries each to save events from local dialer or remote fire alarm panel
- Provides LED indication for AC Power, Common Trouble, CPU Fail and Ground Fault
- Provides telephone line monitoring
