Description
Description
The Hubbell HBL2310 is an industrial-grade, flush-mount locking receptacle designed for secure power connections in demanding environments. It features a NEMA L5-20R configuration, rated for 20 amps at 125 volts, with a two-pole, three-wire grounding setup. Constructed from high-impact nylon with a thermoplastic base, the device offers resistance to abuse, chemicals, and extreme temperatures ranging from -40°C to 75°C. It supports both back and side wiring with #14 to #8 AWG copper conductors and includes screw terminals for reliable installation.
Features
- Face molded of high-impact, abuse-resistant nylon
- Glass-Reinforced thermoplastic polyester base (RTP) has the desirable characteristics of a thermoset material, including heat, flame resistance and dimensional stability. The impact resistance it provides, however, is much greater than that of a thermoset
- #10 silicon bronze terminal screw provides greater strength and resistance to corrosion and stripping . Anti-rotational clamp has a stop to limit the amount of cocking when only one side is used . Accommodates both back and side wiring
- All-brass mounting and grounding system provides a lower resistance ground path and greater resistance to corrosion than steel mounting systems
- One-piece contact with long spring arm (low stress) and oxide cutting nibs: prevents stress and overheating associated with riveted contact and short spring arms
Specs
| Product Type | Twist-Lock |
| Amperage | 20A |
| Device Type | Flush Receptacle |
| Poles and Wires | 2 Pole, 3 Wire Grounding |
| Voltage | 125V |
| Product Variation | Standard |
| Color | Black |
| NEMA Configuration Type | L5-20R |
| Base | Nylon Polyester |
| Face | Black Nylon |
| Terminal Clamp | 0.40" (1.0) Brass |
| Ground Contact | 0.40" (1.0) Brass |
| Ground Contact Material | .040" (1.0) Brass |
| Mounting Strap | .040" (1.0) Brass |
| Back Plate | .040" (1.0) Brass |
| Terminal Screws | #10 Brass |
| Self Ground Clip | Stainless Steel |
| Mounting Screws | Plated Steel-zinc |
| Dielectric Voltage Withstand | 2000V min |
| Horsepower | 1 |
| Current Interrupting | Certified for current interrupting at full rated current |
| Temperature Rise | Maximum 30 deg C temperature rise at full rated current after 50 cycles of overload at 150% of rated power factor of .75 |
| Terminal Identification | (X, Y Z Brass Hot) (G, Green, Grounding) (W, Silver, Neutral) |
| Terminal Accomodation | #14-#8 AWG solid or stranded copper wire |
| Product Identification | Ratings and NEMA identification are permanently marked on device |
| Flammability | HB or better per UL 94 or CSA 22.2 No. 0.6 |
| Operating Temperatures | -40 deg C to 75 deg C (w/o impact) |
